Capital Mall
Rainier Industries Ltd. Tukwila, WA - Award of Excellence
Custom designed wave awnings and "tulips" at an outdoor promenade.
Custom designed wave awnings and "tulips" at an outdoor promenade.
This is a 92' x 28' (at its widest point) long canopy designed to look like an airplane wing. There is also an additional 94' of continuing awnings with the same front radius installed over the store fronts.
This is a 92' x 28' (at its widest point) long canopy designed to look like an airplane wing. There is also an additional 94' of continuing awnings with the same front radius installed over the store fronts.
Custom designed wave awnings and "tulips" at an outdoor promenade.
This is a large gable canopy with hipped ends. Front & back of canopy have the profile of the hipped ends while the left & right sides of the canopy are standard style profiles. The canopy encompasses the existing building. The canopy was drawn & submitted to engineer for stamped drawings & then taken to …
This large awning wraps around the hexagonally-shaped chickee bar and was fabricated in seven separate sections. It projects 12’ at most points, with one section extending to 19’ 7”. Total area is approximately 1450 square feet. The frame, made from 1”x3” welded aluminum, is supported by seven 4” round columns with 24” high decorative covers …
Provide enclosure for year round use to support the client's entertainment service needs. That would be custom made to their unique atmosphere. This system will provide shelter and class to any of their upcoming events.
This project consists of a custom entrance canopy approximately 26' Projection by 44' Wide, with a 12' Clearance Height. Flame-retardant and water-proof, Hazelnut Serge Ferrari STAM 6002 Fabric protects the 1,144 square foot coverage area. The canopy is engineered for 146 MPH Exposure "C" Wind-Loads, and for Seismic Design Category "B".
Elongated Dome without support post. Dimensions 136' wide x 32' projection x 12' drop. Attached by means of a channeled 1 x 1 tracked bolted to frame.
Custom fabricated Z Loft Hotel Bar & Grill patio canopy enclosure, measuring 29’ 6” wide by 34’ 6” projection, with 22 seasonal enclosure panels plus 2 framed fabric doors. Steel substructure consists of (6) 6” x 6” x .250” wall steel posts with 10” x 10” x .375” steel base plates. There are (3) 6” …