Fly bridge Rigid Enclosure Redesign - This project was created using Sunbrella Tresco Linen fabric, with Makrolon UV rigid Polycarbonate and .040 Strataglass windows for the flybridge enclosure and the aft sun enclosure.
Fabricate a 10' X 10' Bimini Enclosure on the Flybridge of our client's Trawler. We also fabricated the weather cloths around the rails aft.
Fabricate a 10' X 10' Bimini Enclosure on the Flybridge of our client's Trawler. We also fabricated the weather cloths around the rails aft.
This is a four sided, sever panel enclosure with opening capability on the windshield and the sides built from .40 ga soft vinyl.
This project has a four bow bimini top made from sattler, outdura, trio, the color is antique beige. The enclosure is a 10 panel ez2cy enclosure with optix bronze 2404 with impact resistance. The fabric used for the enclosure panels was sattler outdura and the color is antique beige. The front middle and the #1 …
Fly bridge Rigid Enclosure Redesign - This project was created using Sunbrella Tresco Linen fabric, with Makrolon UV rigid Polycarbonate and .040 Strataglass windows for the flybridge enclosure and the aft sun enclosure.
On this yacht enclosure we used Stamoid Top White fabric and 60 Mil Strataglass to provide a rigid tight track-to-track enclosure. Clean lines were key to making this project “POP”! All view lines, zipper breaks, and cover flaps all pickup lines from this boat inside and out to provide a sleek appearance. The previous enclosure …
To design and fabricate a top that can handle high speeds and bad weather, as well as be easily taken down and stored within the boat.
To replace and aged enclosure on a 2005 40 foot Formula. The existing enclosure was original and tired. Visibility was terrible, and water leaks abounded.
TEXTILES.ORG
